Breadcrumbs
Home / Featured Products / Shop Beer / Brewing EquipmentBrewing Equipment
$119.99
The best solution for those hot summer brewing days! You get a 25' coil with a garden hose fitting to chill the tap water & a 50' coil of 3/8" copper tubing for the wort for chilling 5 - 6 gallons wort. Product Details
$99.99 You Save: $20.00 |
|
$24.99
NEW LOWER PRICE!!! Threaded (1/2" NPT) thermometer to fit brew pots. Product Details
|
$29.99
Brewing Dial-face thermometer with 1/2"NPT threading & 2" stem. Product Details
|
$34.99
No welding required! Brewing Dial-face thermometer with 2" stem. Simply drill a 1/2" hole in your vessel and install. Product Details
|
$72.99
No welding required! Brewing Dial-face thermometer with 2" stem. Simply drill a 1/2" hole in your vessel and install. This model may be rotated to any viewing angle making reading significantly easier. Product Details
|
$99.99
You can use the Mark II Keg Washer to clean or sanitize anything that touches the beer; brew pails, carboys, Corny kegs, hoses, strainers, thermometers, etc. Product Details
|
|
$2.49
Thermometer with adhesive backing - temperature range from lagers to ales. Product Details
|
|
$9.99
Long-stemmed traditional thermometer (0 - 220°F). Product Details
|
|
$79.99
For regulating refrigerator temps from -20 to 80 degrees F. Now pre-wired, no modifications required! Just plug in your refrigerator, run the capillary tube inside the fridge & dial in desired temperature. Quick & easy! Product Details
$69.99 You Save: $10.00 |
$119.99
Maintains refer temperature within 4 degrees of your setting between 20 and 80 degrees, many refrigerators will only cool to 40 degrees. Controls cooling only. Made in USA. Product Details
$109.99 You Save: $10.00 |
$79.99
50' coil of 3/8" copper tubing with a garden hose fitting attached for chilling 5 - 6 gallons wort. Product Details
|
$44.99
25' coil of 3/8" copper tubing for submerging in ice water for chilling tap water well below ambient temperature prior to flowing through your primary wort chiller. Comes with garden hose fitting attached. Product Details
|
$199.99
The TherminatorTM from Blichmann Engineering is the fastest way to chill your wort to yeast pitching temperature and get your fermentation off to a quick, bacteria-free start. Product Details
|
$99.99
Our bargain plate chiller w/30 plates of 316 stainless steel that are brazed together with 99.9% pure copper. This highly efficient, compact chiller will get your wort to yeast pitching temperatures
quickly. Product Details
|
$129.99
A wider plate chiller w/20 plates of 316 stainless steel that are brazed together with 99.9% pure copper. This highly efficient, compact chiller will get your wort to yeast pitching temperatures
quickly. Product Details
|
Product Categories
- +Shop Beer
- Homebrew Starter Kits
- +Beer Recipe Kits
- +Small Batch Kits & Ingredients
- Bulk Malt Extract
- Dried Malt Extract
- Canned Malt Extract
- +Grain
- +Hops
- +Brewing Yeast
- +Beer Additives, Cleaners & Sanitizers, Etc.
- +Beer Bottles, Caps, Cappers, Etc.
- +Draft/Kegging Equipment
- Brewing Equipment
- Mash Tuns, Kettles, & Brewing Stands
- Blichmann Engineering Products
- Mills
- +Books On Brewing & Beer
- Software
- +Shop Wine
- +Shop Mead & Cider
- +General Fermentation Equipment
- +Shop Cheesemaking, Liqueurs, Soft Drinks, Etc.
- Shop Gifts
- Wine & Beer Making Classes



